Advanced 15000-2 Orbital Shaker with NIST Traceable Certificate 120V from Troemner
|Speed Type||Variable Speed|
|Min Speed (RPM)||15|
|Max Speed (RPM)||300|
|Max Load Capacity (lbs)||150|
|Orbit Diameter (mm)||51|
|Base Dimension (Depth)||718|
|Base Dimension (Height)||178|
|Base Dimension (Width)||678|
|Electrical Max Frequency (Hz)||60|
|Electrical Max Voltage (V)||120|
|Electrical Min Frequency (Hz)||50|
- Exclusive Patented Accu-Drive Shaking System
- 150lb weight capacity
- 5 year industry leading warranty
The Talboys Advanced 15000-2 Orbital Shaker is the largest capacity shaker designed for the heaviest of loads. The shaker has the most powerful drive mechanism of all the shakers and a large orbit for optimal shaking of larger vessels.
Orbital Shaker is supplied with a 24 x 36" (61 x 91cm) non-skid rubber mat. Shaker includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions:Orbital Shaker can be run in cold rooms, incubators, and CO2 environments from -10 to 60°C (14 to 140°F), maximum 80% relative humidity, non-condensing.
NIST Traceable Calibration Certificate provided by Troemner's ISO/IEC 17025 accredited laboratory. Multiple data points within the speed range and time function are reported on the certificate with the associated uncertainties.
Accu-Drive Shaking System: The exclusive patented Accu-Drive Shaking System delivers exceptional speed control, accuracy, and durability. The system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100rpm, the speed accuracy is ± 1% of set speed. When set under 100rpm, speed accuracy is ± 1rpm.
Microprocessor Control: The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-point and will restart if power is interrupted.
Triple Eccentric Drive: Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation.
LED Display: Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off. RS-232 Interface: Provides two-way communication for data logging and unit control. Speed Calibration Mode: Allows user to automatically recalibrate speed display.
Load Sensor: A built-in load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples.
Overload Protection: Audible and visual signals will activate when system detects an obstruction or overload of the tray.
Speed Ramping Feature: Slowly increases speed to desired set-point to avoid splashing.
Audible Alarm: In timed mode, alarm will sound when the time reaches zero. Alarm has optional mute function which can be set from the touch pad control.
Spill-Resistant Design: Channels fluids away from internal components.
Units can be run in cold rooms, incubators, and CO2 environments from -10 to 60°C (14 to 140°F), maximum 80% relative humidity, non-condensing.
Applications: Cell cultures, solubility studies, and extraction procedures
Units include a 92" (234cm) detachable, 3-wire cord and plug (230 volt units are supplied with Euro type plug). Units are also supplied with a 24 x 36" (61 x 91cm) non-skid rubber mat. 5 year limited warranty on parts and labor.
Optional NIST Traceable Calibration Certificate provided by Troemner's ISO/IEC 17025 accredited laboratory. Multiple data points within the speed range and time function are reported on the certificate with the associated uncertainties.
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Controls (Digital/Analog): Digital
Electrical Max Frequency (Hz): 60
Electrical Max Voltage (V): 120
Electrical Min Frequency (Hz): 50
[Shakers] Alarms: Yes
[Shakers] Base Dimension (Depth): 718
[Shakers] Base Dimension (Height): 178
[Shakers] Base Dimension (Width): 678
[Shakers] CE Marked: No
[Shakers] CETLus Marked: No
[Shakers] CTUVus Marked: Yes
[Shakers] Display: LED
[Shakers] Max Load Capacity (lbs): 150
[Shakers] Max Speed (RPM): 300
[Shakers] Min Speed (RPM): 15
[Shakers] Orbit Diameter (mm): 51
[Shakers] RS-232: Yes
[Shakers] Remote Control: No
[Shakers] Speed Type: Variable Speed
[Shakers] USB: No