Advanced Digital 15000-1 Orbital Shaker 120V from Troemner
Controls (Digital/Analog) | Digital |
Speed Type | Variable Speed |
Refrigerated | No |
Min Speed (RPM) | 15 |
Max Speed (RPM) | 500 |
Max Load Capacity (lbs) | 150 |
Timer | Yes |
Alarms | Yes |
RS-232 | Yes |
USB | No |
Display | LED |
CE Marked | No |
CETLus Marked | No |
CTUVus Marked | Yes |
Orbit Diameter (mm) | 25 |
Remote Control | No |
- Exclusive Patented Accu-Drive Shaking System
- 150lb weight capacity
- 5 year industry leading warranty
The Talboys Advanced 15000-1 Orbital Shaker is the largest capacity shaker designed for the heaviest of loads. The shaker has the most powerful drive mechanism of all the shakers and a large orbit for optimal shaking of larger vessels.
Orbital Shaker is supplied with a 24 x 36" (61 x 91cm) non-skid rubber mat. Shaker includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions:
Orbital Shaker can be run in cold rooms, incubators, and CO2 environments from -10 to 60°C (14 to 140°F), maximum 80% relative humidity, non-condensing.
Microprocessor Control | The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-pont and will restart if the power is interrupted. |
Accu-Drive Shaking System | The exclusive Accu-Drive Shaking System delivers exceptional speed control, accuracy and durability. The shaking system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100rpm, the speed accuracy is ±1% of set speed. When set under 100rpm, speed accuracy is ±1 rpm. |
Triple Eccentric Drive | Permanently lubricated ball bearings and maintenance free, brushless DC motor provides reliable service and continuous duty operation. |
LED Display | Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time, or when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, even after power has been turned off. |
RS-232 Interface | Provides two-way communication for data logging and unit control. |
Speed Calibration Mode | Allows user to automatically recalibrate speed display. |
Speed Ramping Feature | Slowly increases speed to desired set-point to avoid splashing. |
Spill-Resistant Design | Channels fluids away from internal components. |
Load Sensor | A built-in load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples. |
Overload Protection | Audible and visual signals will activate when system detects an obstruction or overload of the tray. |
Audible Alarm | In timed mode, alarm will sound when time reaches zero. Alarm has optional mute function which can be set from the touch pad controls. |
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.