Advanced Dura-Shaker for Extreme Environments 120V from Troemner
Controls (Digital/Analog) | Digital |
Speed Type | Variable Speed |
Refrigerated | No |
Min Speed (RPM) | 15 |
Max Speed (RPM) | 500 |
Max Load Capacity (lbs) | 35 |
Timer | Yes |
Alarms | Yes |
RS-232 | Yes |
USB | No |
Display | LED |
CE Marked | No |
CETLus Marked | No |
CTUVus Marked | Yes |
Orbit Diameter (mm) | 19 |
Remote Control | Yes |
- Designed for use in CO2 Incubators and other extreme environments up to 100% humidity
- Remote controller magnetically attaches to most incubators
- 5 year industry leading warranty
The Talboys Dura-Shaker is designed for a wide range of applications including cell cultures that require CO2 and humidity for optimal cell growth. The microprocessor control provides consistent uniform shaking while safely ramping to the set speed.
Dura-Shaker is supplied with an 11 x 13" (27.9 x 33cm) non-skid rubber mat. Dura-Shaker includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions Unit can be run in cold rooms, incubators, and CO2 environments from -10 to 60°C (14 to 140°F), up to 100% humidity.
Microprocessor Control |
The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-point and will restart if power is interrupted. |
Accu-Drive Shaking System |
The exclusive Accu-Drive Shaking System delivers exceptional speed control, accuracy, and durability. The shaking system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100rpm, the speed accuracy is ± 1%. When set under 100rpm, speed accuracy is ± 1rpm. |
Triple Eccentric Drive |
Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation. |
LED Display |
Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time, or when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off. |
RS-232 Interface |
Provides two-way communication for data logging and unit control. |
Speed Calibration Mode |
Allows user to automatically recalibrate speed display. |
Speed Ramping Feature |
Slowly increases speed to desired set-point to avoid splashing. |
Spill-Resistant Design |
Channels fluids away from internal components. |
Overload Protection |
Audible and visual signals will activate when system detects an obstruction or overload of the tray. |
Audible Alarm |
In timed mode, alarm will sound when time reaches zero. Alarm has optional mute function which can be set from the touch pad controls. |
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.