BIS-2 Incubated Shaker from Being Instruments
|Speed Type||Variable Speed|
|Min Speed (RPM)||40|
|Max Speed (RPM)||300|
|Min Temp Range (°C)||9|
|Max Temp Range (°C)||122|
|Platform Length (in)||13.8|
|Platform Width (in)||13.8|
|Base Dimension (Depth)||645.16|
|Base Dimension (Height)||459.74|
|Base Dimension (Width)||500.38|
|Electrical Max Frequency (Hz)||60|
|Electrical Max Voltage (V)||120|
The BEING Incubated Shakers are often used for cell culturing, cell aeration, and solubility studies. In addition to stable temperature conditions, they use an orbital agitation at variable speeds to affect the growth of cell cultures. Auto off and alarm occurs when the real shaking speed is 10% different from setting value, and the motor will stop automatically. BEING’s PID controller provides accurate speed, temperature with timed runs. Speed controller ensures smooth start/stop which can prevent the liquid spill to damage the equipment.
● Colorful LCD display.
● PID microprocessor controls temperature, shaking speed, and timing.
● Smooth start and stop system prevents liquid spillage.
● Auto-controller regulates fan speed to control air flow.
● DC motor provides long term reliability.
● Safety door switch, auto pause operation when door is opened.
● Stainless-steel and easy to clean platform.
● High efficiency filter provides filtration of bacteria and dust.
● A large number of accessories (platforms, tube-racks, and flask clamps) to accommodate various needs.
● Temperature-limiting alarm system, auto switch off when over-temperature
Performance and Features
● Microprocessor PID control.
● Automatic Calibration Function.
● Automatic control of circulating fan speed prevents samples from evaporating due to high wind speed.
● Programmable controller.
● Intuitive LCD controller displays time, frequency and temperature.
● Easy-set digital timer.(1~5999min)
● Continuous operation guarantee, maintenance-free, easy to clean.
● Corrosion resistance stainless steel interior.
● Variety choices of accessories.
● Built-in RS-232 port and USB port for external control and data collection (optional).
Safety & Peace of Mind
● Built-in power interruption protection function, automatic run after power interruption.
● Over-temperature protection which meets DIN 12880 International standard requirements. (BIS Only)
● Independent Over-temp protection, provides double protection to the samples. (BIS Only)
● Temperature deviation alarm.
● Over current protection.
Temperature Range: Ambient+5℃ ~50℃ Ambient +41℉ ~122℉
Temperature Resolution: 0.1
Control System: DIP Microprocessor Control
Display: LCD Display
Working Platform Size (WxD): 13.8×13.8(inch) 350×350(mm)
Interior Height (H): 10.6(inch), 270(mm)
External Dimension (WxHxD): 19.7×18.1×25.4(inch)500×460×644(mm)
Maximum Load per Shelf: 10Kg
Max. Capacity: 4000ml
Net Weight: 42Kg
Air Convection: Forced Air Convection
Shaking Speed Range: 40~300rpm
Universal Clamp: Standard
Timing Range: 1~5999mins
Electrical Requirement: AC120V,60Hz
Cat. No.: BS1512U
Warranty: 2 years
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Controls (Digital/Analog): Digital
Electrical Max Frequency (Hz): 60
Electrical Max Voltage (V): 120
[Shakers] Alarms: Yes
[Shakers] Base Dimension (Depth): 645.16
[Shakers] Base Dimension (Height): 459.74
[Shakers] Base Dimension (Width): 500.38
[Shakers] Display: LCD
[Shakers] Max Speed (RPM): 300
[Shakers] Max Temp Range (°C): 122
[Shakers] Min Speed (RPM): 40
[Shakers] Min Temp Range (°C): 9
[Shakers] Platform Length (in): 13.8
[Shakers] Platform Width (in): 13.8
[Shakers] RS-232: Yes
[Shakers] Speed Type: Variable Speed
[Shakers] USB: Yes