E5850.25.SS Economy Benchtop Reciprocal Shaker from Eberbach
| Controls (Digital/Analog) | Analog |
| Speed Type | Variable Speed |
| Refrigerated | No |
| Min Load Capacity (lbs) | 20 |
| Max Load Capacity (lbs) | 40 |
| Timer | No |
| Alarms | No |
| RS-232 | No |
| USB | No |
| Platform Length (in) | 22.5 |
| Platform Width (in) | 12 |
| CE Marked | No |
| CETLus Marked | No |
| CTUVus Marked | No |
| Remote Control | No |
Eberbach’s E5850 Variable-Speed Benchtop Reciprocal Shaker is designed expressly to occupy a minimum of bench space while maintaining the versatility of our larger units. Like all Eberbach Shakers, the E5850 is simple to use and maintain. The unit is powered by a 1/17 hp Bodine DC motor which drives the platform through a filtered SCR controller. The speed is continuously variable between a range of 20-240 osc/min. Yet, at a given setting the speed is constant and is not affected by normal line voltage fluctuations. The horizontal stroke is factory set at 1". A 1.5" stroke model is also available. Model E5850 will shake a load of up to 40 lbs at low speed and lbs 20 at high speeds. This unit can be optionaly equiped with either a aluminum platform (E6061) measuring 22.5"L x 12"W containing 168-1/4” holes for securing Eberbach E6090 Erlenmeyer flask holders which can hold numerous configurations of Erlenmeyer flasks or a E6040 Utility Box carrier.
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
To be Updated
