|Speed Type||Variable Speed|
|Min Speed (RPM)||30|
|Max Speed (RPM)||350|
|Max Load Capacity (lbs)||25|
|Platform Length (in)||16.5|
|Platform Width (in)||14|
|Orbit Diameter (mm)||25.4|
Eberbach’s bench top variable speed orbital shaker is designed to occupy a minimum table top space yet allow for the versatility offered by larger units with its increased load capacity (unit can accommodate loads up to 25 lbs).
The E6130 can be used with optional utility box, flask holders or if you need to hold something special just ask Eberbach to quote a custom holder for your application. The E6130 has a speed range of 30 to 350 rpms and has a uniform 1.0” diameter orbit.
The E6130 uses Eberbach’s new controller which has digital tachometer along with digital countdown timer. The desired rate of rotation is dialed in from the speed control knob on front panel and speed is monitored via tachometer. The digital countdown timer can be selected for timed operation of the unit can be used for constant operation. The 35 mhp motor has permanently lubricated bearings and is rated for continuous operation.
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Controls (Digital/Analog): Digital
Electrical Max Frequency (Hz): 60
Electrical Max Voltage (V): 115
Electrical Min Frequency (Hz): 50
[Shakers] Alarms: Yes
[Shakers] Base Dimension (Height): 152.4
[Shakers] Base Dimension (Width): 355.6
[Shakers] CE Marked: No
[Shakers] CETLus Marked: No
[Shakers] CTUVus Marked: No
[Shakers] Display: LCD
[Shakers] Max Load Capacity (lbs): 25
[Shakers] Max Speed (RPM): 350
[Shakers] Min Speed (RPM): 30
[Shakers] Orbit Diameter (mm): 25.4
[Shakers] Platform Length (in): 16.5
[Shakers] Platform Width (in): 14
[Shakers] RS-232: No
[Shakers] Remote Control: Yes
[Shakers] Speed Type: Variable Speed
[Shakers] USB: No