EUROSTAR 100 control P4 from IKA

IKA 25004384
Controls (Digital/Analog) Digital
Multiposition No
Min Speed (RPM) 10
Max Speed (RPM) 300
Max Stirring Quantity/Capacity (L) 100
Max Temp Range (°C) 350
Torque Max (Ncm) 320
Viscosity Max (mPas) 100000
Plate Material Alu-cast coating / thermoplastic polymer
Timer Yes
RS-232 Yes
USB Yes
Brushless DC motor Yes
CE approved No
CSA approved No
Stirring quantity max. per stirring position (H2O)100 l
Motor rating input174 W
Motor rating output142 W
Motor principleBrushless DC
Speed displayTFT
Speed range10 - 300 rpm
Reversible direction of rotationyes
Intermittent operationyes
Viscosity max.100000 mPas
Output max. at stirring shaft100 W
Permissible ON time100 %
Torque max. at stirring shaft320 Ncm
Speed controlstepless
Setting accuracy speed1 ±rpm
Deviation of speed measurement n < 300rpm3 ±rpm
Stirring element fasteningchuck
Connection for ext. temperature sensorPT1000
Temperature displayyes
Chuck range diameter0.5 - 10 mm
Fastening on standextension arm
Extension arm diameter16 mm
Extension arm length220 mm
Torque displayyes
Nominal torque3.20 Nm
Torque measurementtrend
deviation of torque measurement I30 ±Ncm
Timeryes
Timer displayTFT
Time setting range1 - 6000 min
Temperature measuring range-10 - +350 °C
Temperature measurement resolution0.1 K
Accuracy of temperature measurement±0.5 + tolerance PT1000 (DIN IEC 751 Class A) K
Limit deviation temperature sensor≤ ± (0.15 + 0.002xITI) K
housing materialalu-cast coating / thermoplastic polymer
communication distance (depend onbuilding) max.150 m
Dimensions (W x H x D)86 x 352 x 230 mm
Weight5.2 kg
Permissible ambient temperature5 - 40 °C
Permissible relative humidity80 %
Protection class according to DIN EN 60529IP 40
USB interfaceyes
RS 232 interfaceyes
Voltage230 / 115 / 100 V
Frequency50/60 Hz
Power input150 W

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Brushless DC motor: Yes
CE approved: No
CSA approved: No
Controls (Digital/Analog): Digital
Timer: Yes
[Lab Stirrer] Max Speed (RPM): 300
[Lab Stirrer] Max Stirring Quantity/Capacity (L): 100
[Lab Stirrer] Max Temp Range (°C): 350
[Lab Stirrer] Min Speed (RPM): 10
[Lab Stirrer] Multiposition: No
[Lab Stirrer] Plate Material: Alu-cast coating / thermoplastic polymer
[Lab Stirrer] RS-232: Yes
[Lab Stirrer] Torque Max (Ncm): 320
[Lab Stirrer] USB: Yes
[Lab Stirrer] Viscosity Max (mPas): 100000

Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.