H2265-HC MyTemp 65 Heating and Cooling Incubator from Benchmark Scientific
Accurate temperature control from 0° to 60°C
Powerful compressor maintains 0°C
Stainless-steel internal chamber
Internal power outlet for shaker, mixers, etc.
For floor standing use or on bench-tops less than 32" tall
Ideal for BOD and Drosophila applications
The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.
A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.
With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.
With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32″/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).
Temperature Range: 0°C to 60°C (RT-25°C to 60°C)
Temperature Accuracy: 0.5°C (at 37°C)
Temperature Uniformity: +/- 1.0°C (at 37°C)
Temperature Increment: 0.1°C
Exterior: 21.25 x 21 x 39.35 in. / 54 x 53.34 x 99.85 cm
Interior: 15.75 x 12.75 x 19.75 in. / 40 x 32.4 x 50.2 cm
Capacity: 65L, (2.3 cu. ft.)
Capacity of BOD bottles: 30 bottles (300ml)
Weight: 117 lbs / 53 kg
Electrical: 120, 60HZ or 230V, 50Hz (385W)
Warranty: 2 Years
Operating Temp. Range: +10 to +30°C
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.