HPS-7A Aluminum Hotplate Stirrer from Pro Scientific

Controls (Digital/Analog) Digital
Multiposition No
Min Speed (RPM) 60
Max Speed (RPM) 1600
Max Load Capacity (ml) 2500
Min Temp Range (°C) 5
Max Temp Range (°C) 400
Plate Diameter (mm) 177.8
Plate Material Aluminum
Timer No
RS-232 No
Brushless DC motor No
CE approved No
CSA approved No

Delivers accurate, repeatable results. A spill-resistant housing channels fluids away from the internal components for long service life , and easy-to-use controls allow adjustments to be dialed in quickly. Micro-processor control - Regulates both heating and stirring functions. Samples are heated to temperature quickly and accurately. Speed is precisely controlled, and provides consistent stirring throughout the entire range. Ramping feature slowly increases speed to avoid splashing, improves magnetic coupling and provides excellent low speed control. Aluminum top plate materials - Durable aluminum tops will not crack or chip, and provide a more even heating surface.LED display - Shows set point temperature. Display is easy-to-read and provides repeatable and accurate results every time. Hot top indicator - For additional safety, hot symbol warning light is illuminated when unit is heated above 40°C. Remains on until unit cools below 40°C, even when heater is turned off.Stir protection - If stirrer motor stops or fails, unit will automatically shut down heater (for stirring models).Overshoot protection - If unit exceeds set temperature by 10°C unit will automatically shut down.Recall last temp - Built-in memory allows users to recall last set temperature even when unit has been turned off.

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Brushless DC motor: No
CE approved: No
CSA approved: No
Controls (Digital/Analog): Digital
Timer: No
Weight (kg): 3.93
[Lab Stirrer] Max Load Capacity (ml): 2500
[Lab Stirrer] Max Speed (RPM): 1600
[Lab Stirrer] Max Temp Range (°C): 400
[Lab Stirrer] Min Speed (RPM): 60
[Lab Stirrer] Min Temp Range (°C): 5
[Lab Stirrer] Multiposition: No
[Lab Stirrer] Plate Diameter (mm): 177.8
[Lab Stirrer] Plate Material: Aluminum
[Lab Stirrer] RS-232: No
[Lab Stirrer] USB: No

Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.