HS55 Digital 5-Positions Stirring Hotplate 115V from Torrey Pines Scientific

Controls (Digital/Analog) Digital
Multiposition Yes
Min Speed (RPM) 100
Max Speed (RPM) 1500
Max Stirring Quantity/Capacity (L) 0.8
Min Temp Range (°C) 25
Max Temp Range (°C) 400
Heat Output (w) 1200
Plate Diameter (mm) 305
Plate Material Ceramic
Timer Yes
RS-232 No
USB No
Brushless DC motor No
CE approved Yes
CSA approved Yes

The EchoTherm HS55 is designed to be the easiest to use and most accurate fully featured multi-position stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100 ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit accessory.

The chassis is cast aluminum and designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.


FEATURES:

  • 5-stirring positions. All the same speed or each at a separate speed
  • Extremely easy use by anyone in your lab
  • Platinum RTD temperature measurement for precision and accuracy
  • Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Heat to 400 centigrade maximum
  • Temperature ramping for exact heating and cooling rates
  • Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
  • PID temperature control for exact, tight sample control of plate or solution
  • Timer goes up to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
  • Electronic calibration stored in chip. No batteries to replace
  • Strong motor and magnet for stirring most samples
  • Stir 5-800 ml beakers of aqueous solutions
  • Full-featured digital display for checking all parameters instantly
  • Fused for safety
  • UL, CSA and CE certified

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Brushless DC motor: No
CE approved: Yes
CSA approved: Yes
Controls (Digital/Analog): Digital
Timer: Yes
[Lab Stirrer] Heat Output (w): 1200
[Lab Stirrer] Max Speed (RPM): 1500
[Lab Stirrer] Max Stirring Quantity/Capacity (L): 0.8
[Lab Stirrer] Max Temp Range (°C): 400
[Lab Stirrer] Min Speed (RPM): 100
[Lab Stirrer] Min Temp Range (°C): 25
[Lab Stirrer] Multiposition: Yes
[Lab Stirrer] Plate Diameter (mm): 305
[Lab Stirrer] Plate Material: Ceramic
[Lab Stirrer] RS-232: No
[Lab Stirrer] USB: No

Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.