LR500A Digital Laboratory Stirrer from Yamato Scientific America
Controls (Digital/Analog) | Digital |
Multiposition | No |
Min Speed (RPM) | 34 |
Max Speed (RPM) | 340 |
Torque Max (Ncm) | 196 |
Timer | No |
RS-232 | No |
USB | No |
Brushless DC motor | Yes |
CE approved | No |
CSA approved | No |
Digital Laboratory Stirrer
- DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required
- Direct-drive system reduces noise and require low maintenance
- Achieves high torque enabling stirring of high viscosity solution
- Digital tachometer for easy speed setting and confirmation
- Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically
- Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples)
Features
- DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required
- Direct-drive system reduces noise and require low maintenance
- Achieves high torque enabling stirring of high viscosity solution
- Digital tachometer for easy speed setting and confirmation
- Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically
- Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples)
MODEL
LR500A
Speed Range *¹
34~340 rpm
Max. Torque
1.96N•m (20kgf•cm)
Display Of Speed / Torque
Digital, 3-digit / Green LED, 2 Steps + Overload Display
Motor (Brushless DC)
70W
Speed Control
Speed feedback control
Safety Device
Stops when overloaded
Stirring Function / Shaft Dia.
Gearless Direct Drive Type / ø10mm
Power Source 50/60Hz
AC100~125V 3A
Included Accessories
Stirring shaft (ø10*500mm), 75mm 4-blade propeller, clamp
Operational Accessories*
Stand and rod
Optional Accessories
Propellers (different types and sizes), vacuum adapter, extra long stirring shaft (ø10*800mm), glass stirring shaft
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.