MaxQ 5000 Floor-Model Shaker large incubated 120V from Thermo Fisher Scientific
Controls (Digital/Analog) | Digital |
Speed Type | Variable Speed |
Refrigerated | No |
Min Speed (RPM) | 15 |
Max Speed (RPM) | 500 |
Max Load Capacity (lbs) | 75 |
Min Temp Range (°C) | 10 |
Max Temp Range (°C) | 60 |
Timer | Yes |
Alarms | Yes |
RS-232 | Yes |
USB | No |
Platform Length (in) | 30 |
Platform Width (in) | 18 |
Display | LED |
CE Marked | Yes |
CETLus Marked | No |
CTUVus Marked | No |
Orbit Diameter (mm) | 25 |
Remote Control | No |
Key Features:
- Easily accommodate six 4L flasks, four 6L flasks or six 2800mL Fernbach flasks
- Wide temperature range: 10°C above ambient to 60°C on incubated models, 15°C below ambient to 60°C on refrigerated models
- Monitor and control chamber temperature range with ±0.1°C accuracy at 37°C
- Overtemperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails
- Triple eccentric drive handles heavy loads, uniform agitation and continuous 24 hr. operation, even at high speeds
- Drip pan built into the chamber floor under the platform contains spills
- Clear, scratch-resistant lid for sample viewing
- With foot pedal for hands-free operation and retractable casters for portability
- Optional shelf provides additional storage space and convenience when switching flasks
- Access ports provided through side of cabinet wall for probes, thermocouples or sensors
- Optional gassing manifold enables direct gassing into flasks for anaerobic cultures
Analog Models:
- Easy-to-read LED digital temperature display
- Perform timed studies with timed operation from 1 to 60 minutes or operate shaker in continuous mode
Digital Models:
- Variable speed control from 15 to 500rpm
- Continuous and timed operation from 0.1 hour up to 999 hours or 0.1 to 999 min.
- View speed, time and temperature simultaneously on three separate LED digital displays
- Visual/audible alarms alert to temperature deviations; heat turns off if temperature deviates ±1°C of setpoint
- Shaker shutdown and audible/visual alarms signal if unit operates ±10% of set speed, preventing the shaker from walking
- Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
- User-adjustable speed calibration can be performed using a digital handheld tachometer, where verification is required and protocols can be standardized
- Unbalanced load sensor stops platform motion when excess vibration is detected and visual/audible alarms signal until condition is corrected
- Retains parameters during power failure and restarts unit automatically after power is restored
- Solid-state DC brushless motor is maintenance-free
- RS-232 interface allows remote monitoring of speed, time and temperature
Overall Dimensions:
- Platform dimensions: 30 × 18″ (76 × 45 cm)
- Overall Dimensions L × W × H: 32 × 41 × 41″ (83.1 × 104.1 × 104.1 cm)
Shipping Weight:
- Models SHKA5000 and SHKE5000: 476 lb. (215.9kg)
- Models SHKA5000-7 and SHKE5000-7: 512 lb. (232.2kg)
Requires:
- Universal Platform (without clamps), or
- Dedicated Platform (with pre-installed clamps)
- Clamps
Recommended for:
- Cell culture
- Bacterial suspensions
- Solubility studies
- Staining and destaining
- Extraction procedures
- Washing procedures
- Plant growth
- Hybridizations
- General mixing
- Plasmid purification
- Protein expression
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Back To Top