New Brunswick Excella E2 120V Shaker from Eppendorf
Controls (Digital/Analog) | Digital |
Speed Type | Variable Speed |
Refrigerated | No |
Min Speed (RPM) | 50 |
Max Speed (RPM) | 400 |
Timer | Yes |
Alarms | Yes |
RS-232 | No |
USB | No |
Platform Length (in) | 11 |
Platform Width (in) | 13 |
Display | LED |
CE Marked | Yes |
CETLus Marked | Yes |
CTUVus Marked | No |
Orbit Diameter (mm) | 19 |
Remote Control | No |
The Excella E-2 is a portable benchtop shaker utilizing a UniCentric™ single eccentric counterbalanced drive to provide horizontal plane rotary motion in a 1.91 cm (¾ in) circular orbit. A Proportional/Integral (PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of 50 rpm – 400 rpm . The shaker may be operated either continuously or in a timed mode via a programmable timer for shaking periods of 0.1 – 99.9 h.
The E-2 is equipped with visual and audible alarms which are activated when an alarm condition exists, as follows:
• The end of a timed run
• Deviations of shaking speed
• Power failure
A wide variety of platforms can be used with the E-2. Dedicated platforms are available for a variety of flask sizes. Universal platforms, and test tube racks are also available.
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.