Professional Digital 1000IC-3 Incubating/Cooling Orbital Shaker 120V from Troemner
Controls (Digital/Analog) | Digital |
Speed Type | Variable Speed |
Refrigerated | No |
Min Speed (RPM) | 100 |
Max Speed (RPM) | 1200 |
Min Temp Range (°C) | -10 |
Max Temp Range (°C) | 65 |
Timer | Yes |
Alarms | Yes |
RS-232 | No |
USB | No |
Display | LED |
CE Marked | No |
CETLus Marked | No |
CTUVus Marked | No |
Orbit Diameter (mm) | 3 |
Remote Control | No |
- Heats to 65°C and cools to 10°C below ambient
- LED displays for temperature, speed and time
- Calibration mode for temperature
- 5 year industry leading warranty
The Talboys Model 1000IC-3 Incubating/Cooling Orbital Shaker is microplate ready without the need for any additional accessories. Optional modular blocks can accommodate micro-tubes, centrifuge tubes, vials or culture tubes. Unit holds microplates or modular blocks with a 5" (12.7cm) tall interior capacity. Ideal for analyses that requires a stable, controlled temperature.
Model 1000IC-3 Incubating/Cooling Orbital Shaker is supplied with an adapter bracket to hold optional modular blocks. Shaker includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions:
Shaker can be run in conditions from 5 to 40°C (41 to 104°F), maximum 80% relative humidity, non-condensing.
Microprocessor Control | The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-pont and will restart if the power is interrupted. |
PID Temperature Controller | Maintains precise temperature control from ambient 10°C below ambient to 65°C. Easy-to-use controls allow users to adjust temperature in 1°C increments. |
Triple Eccentric Drive | Permanently lubricated ball bearings and maintenance free, brushless DC motor provides reliable service and continuous duty operation. |
LED Display | Touch pad controls with easy-to-read, independent LED displays for temperature, speed and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time, or when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, even after power has been turned off. |
Temperature Calibration Mode | Allows user to calibrate the unit to an external temperature device. |
Speed Ramping Feature | Slowly increases speed to desired set-point to avoid splashing. |
Spill-Resistant Design | Channels fluids away from internal components. |
Overload Protection | Audible and visual signals will activate when system detects an obstruction or overload of the tray. |
Audible Alarm | In timed mode, alarm will sound when time reaches zero. Alarm has optional mute function which can be set from the touch pad controls. |
Caution Hot Indicator | Symbol illuminates when the temperature of the air in the chamber reaches 40°C and remains lit until the temperature cools down. |
Polycarbonate Lid | Permits viewing of samples without disturbing the internal temperature. |
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.