Revolver Adjustable Lab Rotator 120V from Labnet International

Labnet H5600
Controls (Digital/Analog) Analog
Speed Type Fixed Speed
Refrigerated No
Max Speed (RPM) 18
Max Load Capacity (lbs) 1.75
Timer No
Alarms No
RS-232 No
USB No
CE Marked Yes
CETLus Marked No
CTUVus Marked No
Remote Control No
Base Dimension (Depth) 127
Base Dimension (Height) 152.4
Base Dimension (Width) 239
Electrical Max Frequency (Hz) 60
Electrical Max Voltage (V) 120
Electrical Min Frequency (Hz) 50
Max Shaking Angle 90
Min Shaking Angle 0

Incubator-Compatible Lab Rotator

Labnet's Revolver™ lab sample rotator accepts a variety of tube sizes and mixes them horizontally, vertically, or any position in between. Changing the mixing angle is easy simply turn the rotisserie. No tools are required.

  • Complete 360° rotation
  • Adjustable 0-90° mixing angle
  • Interchangable rotisserie options for all common lab tubes.
  • Independently adjustable rotisseries
  • Cold room and incubator compatible

Interchangeable rotisseries accept tubes from 1.5 ml to 50 ml. Each rotisserie is split into two halves. Each of the halves can be exchanged to mix more than one tube type at the same time. Each rotisserie half can be rotated independently from a center point on the shaft. Placing the halves in line with the shaft produces an end over end tumbling motion, similar to that used to mix blood tubes. Rotating the rotisserie at a right angle to the shaft produces a gentle mixing motion, ideal for delicate samples. Any position in between these two extremes may be selected to achieve the desired mixing action. Rotation speed is fixed at 18rpm (20rpm for 230V models).

Revolver Lab Rotator Operation

The Revolver™ lab rotator can be used in ambient temperatures from +4°C to 55°C, making it ideal for a variety of laboratory settings such as Molecular Biology, Biochemistry, clinical and Histochemistry. Small enough to fit on a crowded bench, the rotator is easily moved where it is needed - the bench, cold room, incubator or biological hood. With a molded housing and unique rotisserie design, the Revolver is easy to clean and decontaminate. A 36 x 1.5/2.0 ml rotisserie is supplied with the Revolver™. Other configurations are available separately.

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Controls (Digital/Analog): Analog
Electrical Max Frequency (Hz): 60
Electrical Max Voltage (V): 120
Electrical Min Frequency (Hz): 50
Refrigerated: No
Timer: No
[Shakers] Alarms: No
[Shakers] Base Dimension (Depth): 127
[Shakers] Base Dimension (Height): 152.4
[Shakers] Base Dimension (Width): 239
[Shakers] CE Marked: Yes
[Shakers] CETLus Marked: No
[Shakers] CTUVus Marked: No
[Shakers] Max Load Capacity (lbs): 1.75
[Shakers] Max Shaking Angle: 90
[Shakers] Max Speed (RPM): 18
[Shakers] Min Shaking Angle: 0
[Shakers] RS-232: No
[Shakers] Remote Control: No
[Shakers] Speed Type: Fixed Speed
[Shakers] USB: No

Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.