SCF2 Fixed Microcentrifuge from Stuart

Controls (Digital/Analog) Digital
Refrigerated No
Speed Type Fixed Speed
Rotor Fixed Angle
Max Speed (RPM) 13500
Max RCF 12300
Run Time Min (sec) 60
Run Time Max (sec) 1800
Acceleration Time to Full Speed (sec) 12
Deceleration Time to Full Stop (sec) 16
Max Capacity 1.5 mL 12
Timer Yes
Noise Level 60
CE approved Yes
CSA approved Yes

Whether you are dealing with microplate processing, blood banking, sample preparation and processing, cell and tissue culture, drug discovery, or other clinical applications, reliably separating liquids based on density is fundamental. Looking for the best laboratory centrifuge to spin liquids or remove suspended materials from an array of mediums is important. With a lot of models, brands, and online stores to choose from, purchasing the perfect laboratory centrifuge for your lab protocols might be a little challenging. Lab.Equipment can cut the frills for you! Check out how the Stuart SCF2 Fixed can meet your separation needs and routine applications below. If it does not make your cut, read about our review, FAQ, and comparison of the SCF2 Fixed with other lab centrifuges to acquire the most fit unit for your requirements.

Lab.Equipment presents 211 lab centrifuges from 11 popular manufacturers such as Stuart. Having extensive knowledge on these laboratory centrifuges, rely on us to present well-curated product information for you. We are not like any other single distributor around as we promise not to shove you a brochure with terms and catchwords nearly all manufacturers offer to confuse us persevering lab staffs more. Let us help you save not just your budget but also your valuable time. Our carefully drafted and documented descriptions can cut through the noise and lead you to the most fit laboratory centrifuge for your protocol, whether it is with this Stuart SCF2 Fixed or not.

What is the speed offered by the Stuart SCF2 Fixed Microcentrifuge?

Rotational Speed / Revolutions Per Minute (RPM)

The Stuart SCF2 Fixed Microcentrifuge is a fixed speed unit, allowing users to work on samples at 13,500 RPM.

How much separation power does the Stuart SCF2 Fixed Microcentrifuge come with?

Relative Centrifugal Force (RCF)

The Stuart SCF2 Fixed Microcentrifuge runs your samples with a maximum RCF of 12,300 x g.

What type of rotors does the Stuart SCF2 Fixed Microcentrifuge feature?

Rotor Type

The Stuart SCF2 Fixed Microcentrifuge feature fixed angle rotors capable of holding sample tubes at a stable angle, typically ranging from 25° to 40°. These rotors are ideal when working with high centrifugal forces and are perfect for removing excess debris, pelleting particles from suspension, or collecting pellets.

Is the Stuart SCF2 Fixed Microcentrifuge a refrigerated unit or not?

The Stuart SCF2 Fixed Microcentrifuge is a non-refrigerated or ambient-temperature unit recommended for applications spinning non-temperature sensitive samples as well as a variety of routine and clinical applications that do not require precise temperature control.

Want to request a PDF quote for the Stuart SCF2 Fixed Microcentrifuge?

We will not waste your time playing phone tag with a high pressure sales rep, simply use the Instant Quote tool above and you will get a quote emailed to your inbox within 30 seconds! No pesky sales reps calling on you we promise.

Other notable features of the Stuart SCF2 Fixed Microcentrifuge:

Maximum Capacity

You can fit and run this many tubes in the unit:
1.5 mL: 12


Automatically switch off the Stuart SCF2 Fixed Microcentrifuge after a preset time since it comes with a timer that can run from 60 to 1,800 seconds.

Acceleration Time to Full Speed

It only takes 12 seconds for the Stuart SCF2 Fixed Microcentrifuge to reach its full speed.

Deceleration Time to Full Stop

The Stuart SCF2 Fixed Microcentrifuge just takes 12 seconds to reach a full stop.

Noise Level

With a sound-power level of 60dB, the Stuart SCF2 Fixed Microcentrifuge offers a noise level still acceptable and below the threshold that can damage hearing.

Do you have any questions about the Stuart SCF2 Fixed Microcentrifuge that we missed answering for you here?

Just ask via live chat to the right, our Contact Us page, or email [email protected] and we will get back to you with a prompt and friendly response.

The SCF2 is a compact microcentrifuge for centrifugation of up to 12 x 1.5ml or 2.2ml microfuge tubes or four strips of 8 x 0.2ml tubes at speeds of up to 13,500rpm. The unit is supplied with adaptors for use with the fixed angle rotor to enable 0.2ml tubes to be centrifuged. The rotors are easily installed without the use of tools. Centrifugation speed can be displayed as either rpm or rcf and the timer can be set for run times of between 1 and 30 minutes. In addition, a pulse button enables a rapid spin down by accelerating the rotor to the preset rpm then promptly decelerating. For safety, the door of the SCF2 remains locked while the rotor is in motion.

Stuart is an industry-leader providing a range of benchtop equipment including centrifuges, homogenizers, overhead stirrers, liquid handling solutions, and incubators for various scientific laboratories, universities, medical facilities, and research centers. Offering laboratory instruments manufactured and distributed in an ISO9001:2000 factory, Stuart guarantees equipment made for improved laboratory productivity and better research results. Quality is assured with all electronic products meticulously tested to conform to CE requirements.

Stuart's innovative product line offered by Lab.Equipment include:

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

CE approved: Yes
CSA approved: Yes
Controls (Digital/Analog): Digital
Refrigerated: No
Timer: Yes
[Lab Centrifuge] Acceleration Time to Full Speed (sec): 12
[Lab Centrifuge] Deceleration Time to Full Stop (sec): 16
[Lab Centrifuge] Max Capacity 1.5 mL: 12
[Lab Centrifuge] Max RCF: 12300
[Lab Centrifuge] Max Speed (RPM): 13500
[Lab Centrifuge] Noise Level: 60
[Lab Centrifuge] Rotor: Fixed Angle
[Lab Centrifuge] Run Time Max (sec): 1800
[Lab Centrifuge] Run Time Min (sec): 60
[Lab Centrifuge] Speed Type: Fixed Speed

Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.