ST15 5 Position Analog Stirrers 115V 2.5A from Torrey Pines Scientific

Controls (Digital/Analog) Analog
Multiposition Yes
Min Speed (RPM) 100
Max Speed (RPM) 1500
Max Stirring Quantity/Capacity (L) 5
Heat Output (w) 1200
Plate Diameter (mm) 304.8
Plate Material Ceramic
Timer No
RS-232 No
USB No
Brushless DC motor No
CE approved Yes
CSA approved Yes

Each Torrey Pines Scientific® hot plate is made with a cast aluminum chassis that is painted with chemically resistant epoxy paint. The chassis is designed to keep spills out of the case. Heating and stirring controls are solid state and are mounted well forward of the heater surface to prevent accidental burns. Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate. Hot plate stirrers are available in the “C” version with minimal chassis openings and purge ports for pressurizing the inside of the chassis with lab air or any inert lab gas. This positive pressure keeps aggressive vapors from getting inside the chassis and away from the control electronics extending the life of the unit.

FEATURES:

  • Heat to 450°C on plate surface in minutes (stirring hot plates only)
  • Stir from 100–1500 rpm on each stirring position with individual controls
  • Stir 5-800 ml beakers on HS15 and ST15
  • Stir 9-400 ml beakers on HS19 and ST19
  • Plate size on all units is 12” (30.48 cm) x 12”(30.48 cm)
  • Solid ceramic heater surface for excellent chemical resistance
  • Corrosion resistant models available for work with aggressive chemicals
  • Heater plate mounted in cast aluminum frame that remains cool for safety
  • Powerful 1200 watt heaters on hot plate/stirrers
  • Fused for safety
  • Rugged cast aluminum chassis
  • 12-month warranty
  • UL, CSA and CE certified

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Brushless DC motor: No
CE approved: Yes
CSA approved: Yes
Controls (Digital/Analog): Analog
Timer: No
[Lab Stirrer] Heat Output (w): 1200
[Lab Stirrer] Max Speed (RPM): 1500
[Lab Stirrer] Max Stirring Quantity/Capacity (L): 5
[Lab Stirrer] Min Speed (RPM): 100
[Lab Stirrer] Multiposition: Yes
[Lab Stirrer] Plate Diameter (mm): 304.8
[Lab Stirrer] Plate Material: Ceramic
[Lab Stirrer] RS-232: No
[Lab Stirrer] USB: No


Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.