V-32 Multi Vortex Mixer from Grant Instruments
| Controls (Digital/Analog) | Analog |
| Speed Type | Variable Speed |
| Mixing Movement | Orbital |
| Min Speed (RPM) | 500 |
| Max Speed (RPM) | 3000 |
| Max Load Capacity (lbs) | 35 |
| Min Temp Range (°C) | 4 |
| Max Temp Range (°C) | 40 |
| Timer | No |
| Orbit Diameter (mm) | 2 |
| Brushless DC motor | No |
| CE approved | Yes |
| CSA approved | No |
Handle Optimal Volumes, Bring in Optimal Mixing Results
Confidently refining assay results, dealing with homogenous solutions, and getting elevated mixing output importantly rely on the laboratory mixer used. Integral to universities, medical facilities, and labs, it’s only fitting to allocate a good time screening through mixer selections available to get one that completely meets your application requirements. Avoid frequent product replacements by checking not just the sample types and the amount of samples you will be working with but also the applications you will be doing in the future first before shopping an actual lab mixer. If you are looking for something that can accommodate samples of up to 35 lbs, then the V-32 Multi Vortex Mixer from Grant Instruments is the perfect choice for you to go for. .
Hard-wearing Laboratory Mixers for Better Management of Solutions
Some factors to keep in mind when selecting a lab mixer that can enhance your lab or workroom's mixing productivity include speed type and the speed range covered. The V-32 Multi Vortex Mixer from Grant Instruments presents variable speed to precisely mix samples from 500 RPM up to 3000 RPM, making it a recommended vortex mixer for laboratories that usually work on cell culture as well as microbiology tasks. Consider the Ergonomic Basic Fixed Speed Vortex Mixer from Troemner, also an equally respected mfg, if you need something with a higher max speed compared to this unit.
Proven Mixing for Every Application
Be sure you understand the differences between mixer types before actually deciding on which to invest in. If you focus on vigorous re-suspension, agitation, or mixing of experimental samples and dilutants in vials, cylinders, microplates, or test tubes, then a vortexer would be the lab workhorse for you. An analog vortex mixer with an orbital mixing movement and a temperature range of 4°C-40°C, the V-32 Multi Vortex Mixer from Grant Instruments brings into action correct mixing for molecular biology applications.
Fully-featured for Fundamental Mixing
Mixing Movement
Completely mixing samples is trouble-free with the Grant Instruments vortex mixer as it efficiently moves with an orbital mixing action.
Mixer Control
Freely alter laboratory mixer settings with the Grant Instruments V-32 by use of its analog control.
Mixer Speed Type
This variable speed mixer allows speed modification while in operation from 500 RPM to 3000 RPM.
CE Approved
CE approved, users are ensured that the Grant Instruments V-32 vortex mixer conforms to product standards according to EC directives.
Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand - yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet.
With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5ml, 1.5ml, and 15ml tubes.
- Adjustable speed control: 750 to 3000 rpm
- 'Continuous' or 'touch' operation
- For tubes up to 20 mm diameter
- Pressure sensitive cup accommodates tubes up to 20mm diameter
- Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range
- Extremely easy to operate - select either 'continuous' or 'touch' operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm
- In 'touch' mode, agitation starts in response to pressure on the pressure sensitive cup.
- Exceptionally compact with a low profile and small footprint - fits into almost any location
- Rubber suction pads hold tight to the work surface and prevent the unit from 'walking' - they also absorb vibration and prevent its transmission to the workbench
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
To be Updated
