3850 ML Autoclave from Tuttnauer

Ethernet No
Chamber Volume (L) 62
RS-232 No

Given the large selection of accessible autoclaves in the market, searching for the optimal unit to sanitize pharmaceutical items, medical supplies and equipment, liquid and solid samples, and multiple laboratory instruments can be a challenging task. Lab.Equipment is here to help you in getting the best fit unit for your lab, helping you save not only your budget but also your time. Lab Equipment's Tuttnauer ML 3850 ML autoclave can provide effective sterilization and cleaning for your laboratory application. If you think it does not, you can look into the best one to reach your expected output based off our FAQ, reviewand comparison of the 3850 ML to other autoclaves available so continue reading below.

Lab.Equipment showcases 60 autoclaves from all 8 major autoclave manufacturers such as Tuttnauer. With Lab.Equipment having good insights on these autoclaves, expect to read product details meticulously drafted for you. We are not like any other supplier around as we would not just offer you a portfolio complete with the same buzzwords and terminologies common manufacturers give to mislead us hard-working lab staffs more. Allow us to assist you in acquiring the perfect fit autoclave for your laboratory protocols through factual and carefully drafted descriptions, whether it is with this Tuttnauer ML 3850 ML or not.


In comparison with other autoclaves available in the market, how much volume can the chamber of the 3850 ML autoclave accommodate?

Recommended for advanced decontamination processes in your lab, the 3850 ML autoclave features with a 62L sterilization chamber volume.


Looking for a PDF quote for the Tuttnauer ML 3850 ML autoclave?

Just use the Instant Quote tool above and expect to receive your quote in your email inbox within 30 seconds or less!

Here are some of the key features of the Tuttnauer ML 3850 ML Autoclave:

Automation

More affordable compared to fully automatic units available, the 3850 ML is a semi-automatic and electro-mechanically controlled autoclave recommended for sterilization of samples with low sensitivity.

Printing

3850 ML functions without a built-in printer. It must be constantly supervised by a lab staff when at work to secure that temperature and pressure levels are rightly taken care of .

Touchscreen

The quality 3850 ML from Tuttnauer does not feature a touchscreen control system.

Connectivity

Unfortunately, the 3850 ML does not come with a built-in ethernet port and cannot be connected to the internet . However, it offers an RS232 PC connection port for easy remote maintenance and software updates.


Any questions regarding the Tuttnauer 3850 ML autoclave that we missed answering for you here?

Feel free to ask us through the live chat to the right, our Contact us page, or email us at [email protected] and we will get back to you shortly with a prompt and friendly response




The semi-automatic laboratory autoclave series is an affordable sterilizer for laboratories that do not want to compromise on quality, safety and reliability and need to sterilize loads with low sensitivity. The semi-automatic series is available in floor standing, vertical or benchtop models and in chamber sizes ranging from 23 to 160 liters. Process control is preformed by a pressure switch.The semi-automatic control system includes a timer that can be set from 1 to 99 minutes. The ML models have a semi-automatic control panel.

  • Chamber constructed of 316Ti grade stainless steel

  • Maintenance access to all components for easy servicing Complies with the strictest international directives and standards

  • 23 to 160 Liter autoclave chamber volume

  • Sterilizes low sensitivity loads, including liquids, solids and glassware

  • Autoclave door is designed with a number of safety features


STERILIZATION APPLICATIONS

  • Liquids such as nutrient media and buffer solutions

  • Solid items such as pipettes, tubes and filters

  • Glassware and plastic articles

SAFETY FEATURES

  • The autoclave lids are designed with a number of independent mechanical and digital safety features. A safety device prevents the operator from opening the door when the chamber is pressurized

  • A cycle cannot start if the door is open or not properly locked

  • The door cannot unlock until chamber pressure reaches room pressure

  • Safety Valves: The chamber is equipped with safety valves – if the pressure exceeds the allowed limit the safety valves will discharge

QUALITY FEATURES

  • The chamber is constructed of long lasting 316Ti grade stainless steel with superior corrosion resistance

  • The autoclave is designed for easy servicing allowing maintenance access to all components

  • Drain Protection: The exhaust drain is mixed with cold tap water that cools the exhaust’s temperature before reaching the drain.

STERILIZER DIRECTIVES AND STANDARDS COMPLIANCE

Tuttnauer’s high quality laboratory autoclaves comply with the strictest international directives and standards.

  • Pressure Equipment: PED 97/23 EEC, EN 10028-7, ASME Code Sec VIII

  • Safety: IEC/UL/EN61010-1, IEC 61010-2-040, EN 61326

  • Sterilization: DIN 58951 Series, ISO 17665-1:2006

  • Quality System: ISO 9001:2000, ISO 13485:2003

Tuttnauer has been proving its global presence in the laboratory industry since 1925. With expertise in sterilization and infection control applications, Tuttnauer has been participating in wide-scale projects with renowned research facilities and universities since its initial operating stages. Engineered for exceptional performance in cleaning, disinfection and sterilization tasks, Tuttnauer’s wide ranging product line includes sterilizers for hospitals and research institutes, laboratory autoclaves offered in various sizes and for different applications, washers and disinfectors for lab and medical industries, and sterilization products for CSSD. With certification and compliance to international standards such as the FDA, ASME, ISO and CE Medical Devices, Tuttnauer’s products are ensured to be high-performing and of premium quality. Headquarters based in Netherlands and New York (USA) enabled Tauttner to support worldwide operations in regions including Latin America & Caribbean, Asia Pacific, Middle East, Africa, Europe, and USA & Canada.    

Browse Tuttnauer’s product line available on Lab.Equipment below: 

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Automation: Semi-Automatic
Ethernet: No
Printer: No
Touchscreen: No
[Lab Autoclave] Chamber Volume (L): 62
[Lab Autoclave] RS-232: No

Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.