Advanced 1000RS Rocking Shaker with NIST Traceable Certificate 120V from Troemner
|Speed Type||Variable Speed|
|Min Speed (RPM)||1|
|Max Speed (RPM)||50|
|Max Load Capacity (lbs)||10|
|Base Dimension (Depth)||432|
|Base Dimension (Height)||127|
|Base Dimension (Width)||279|
|Electrical Max Frequency (Hz)||60|
|Electrical Max Voltage (V)||120|
|Electrical Min Frequency (Hz)||50|
|Max Shaking Angle||15|
|Min Shaking Angle||0|
- Electronic tilt adjustment from 0 to 15°* while unit is operating
- LED displays for speed and tilt angle, and time
- Timer with audible alarm
- 5 year industry leading warranty
The Talboys Advanced 1000RS Rocking Shaker is ideal for cell culture work and is designed to be used in a variety of environmental conditions. Unit has an adjustable speed range from 1 to 50 rpm*.
Advanced Rocking Shaker is supplied with a 12.75 x 10" (32.4 x 25.4cm) non-skid rubber mat. Rocker includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions:Rocking Shaker can be run in cold rooms, incubators, and CO2 environments from -10 to 60°C (14 to 140°F), maximum 80% relative humidity, non-condensing.
Maximum speed/tilt angle may vary with heavy or unbalanced loads
NIST Traceable Calibration Certificate provided by Troemner's ISO/IEC 17025 accredited laboratory. Multiple data points within the speed range and time function are reported on the certificate with the associated uncertainties.
The microprocessor control provides electronic tilt angle adjustment which allows the user to easily adjust rocking angle from 0 to 15° while unit is operating. Precise speed control provides a smooth, low-speed rocking motion down to 1 rpm.
Touch pad controls with easy-to-read, independent LED displays for speed and tilt angle, and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off.
Low Profile Design
Takes up less space and easily fits into most hoods and incubators. Cast aluminum base offers durability and added stability.
Speed Ramping Feature
Slowly increases speed to desired set-point to avoid splashing.
Channels fluids away from internal components.
Audible and visual signals will activate when system detects an obstruction or overload of the tray.
In timed mode, alarm will sound when time reaches zero.
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Controls (Digital/Analog): Digital
Electrical Max Frequency (Hz): 60
Electrical Max Voltage (V): 120
Electrical Min Frequency (Hz): 50
[Shakers] Alarms: Yes
[Shakers] Base Dimension (Depth): 432
[Shakers] Base Dimension (Height): 127
[Shakers] Base Dimension (Width): 279
[Shakers] CE Marked: No
[Shakers] CETLus Marked: No
[Shakers] CTUVus Marked: No
[Shakers] Display: LED
[Shakers] Max Load Capacity (lbs): 10
[Shakers] Max Shaking Angle: 15
[Shakers] Max Speed (RPM): 50
[Shakers] Min Shaking Angle: 0
[Shakers] Min Speed (RPM): 1
[Shakers] RS-232: No
[Shakers] Remote Control: No
[Shakers] Speed Type: Variable Speed
[Shakers] USB: No