Advanced Digital 1000WS Waving Shaker 120V from Troemner
| Controls (Digital/Analog) | Digital |
| Speed Type | Variable Speed |
| Refrigerated | No |
| Min Speed (RPM) | 1 |
| Max Speed (RPM) | 30 |
| Max Load Capacity (lbs) | 5 |
| Timer | Yes |
| Alarms | Yes |
| RS-232 | No |
| USB | No |
| Display | LED |
| CE Marked | No |
| CETLus Marked | No |
| CTUVus Marked | No |
| Remote Control | No |
- Electronic tilt adjustment from 0 to 20°* while unit is operating
- LED displays for speed and tilt angle, and time
- Timer with audible alarm
- 5 year industry leading warranty
The Talboys Advanced Digital 1000WS Waving Shaker provides precise speed control and a smooth, low foaming, three dimensional "wave" motion. Ideal for use in a wide range of laboratory applications and designed to be used in a variety of environmental conditions. Tray includes a non-skid rubber mat that is suitable for holding petri dishes. Unit has an adjustable speed from 0 to 30 rpm*.
Advanced Waving Shaker is supplied with an 11.75 x 8.75" (29.9 x 22.2cm) non-skid rubber mat. Waver includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions:
Waving Shaker can be run in cold rooms, incubators, and CO2 environments from -10 to 60°C (14 to 140°F), maximum 80% relative humidity, non-condensing.
| Microprocessor Control | The microprocessor control provides electronic tilt angle adjustment which allows the user to easily adjust waving angle from 0 to 20° while unit is operating. Precise speed control provides smooth, low-speed waving motion down to 1 rpm. |
| LED Display | Touch pad controls with easy-to-read, independent LED displays for speed and tilt angle, and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab beches. Timer will display elapsed time or, when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, wvwn after power has been turned off. |
| Low Profile Design | Takes up less space and easily fits into most fume hoods and incubators. Cast aluminum base offers durability and added stability. |
| Speed Ramping Feature | Slowly increases speed to desired set-point to avoid splashing. |
| Spill-Resistant Design | Channels fluids away from internal components. |
| Overload Protection | Audible and visual signals will activate when system detects an obstruction or overload of the tray. |
| Audible Alarm | In timed mode, alarm will sound when time reaches zero. |
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
To be Updated
