Advanced Digital 3750 Reciprocating Shaker 120V from Troemner
| Controls (Digital/Analog) | Digital |
| Speed Type | Variable Speed |
| Refrigerated | No |
| Min Speed (RPM) | 20 |
| Max Speed (RPM) | 300 |
| Max Load Capacity (lbs) | 15 |
| Timer | Yes |
| Alarms | Yes |
| RS-232 | Yes |
| USB | No |
| Display | LED |
| CE Marked | No |
| CETLus Marked | No |
| CTUVus Marked | Yes |
| Remote Control | No |
- LED displays for speed and time
- Exceptional speed control, accuracy and durability
- Calibration mode for speed
- 5 year industry leading warranty
The Talboys Advanced 3750 Reciprocating Shaker is designed for a wide range of applications including cell cultures that require accurate and repeatable results. The microprocessor control provides consistent uniform shaking action while safely ramping to the set speed.Reciprocating Shaker is supplied with an 11 x 13" (27.9 x 33cm) non-skid rubber mat. Shaker includes a 5 year, industry leading limited warranty on parts and labor.
| Microprocessor Control | The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-pont and will restart if the power is interrupted. |
| Shaking System | The shaking system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100rpm, the speed accuracy is ±1% of set speed. When set under 100rpm, speed accuracy is ±1 rpm. |
| Single Eccentric Drive | Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation. |
| LED Display | Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab beches. Timer will display elapsed time or, when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, wvwn after power has been turned off. |
| RS-232 Interface | Provides two-way communication for data logging and unit control. |
| Speed Calibration Mode | Allows user to automatically recalibrate speed display. |
| Speed Ramping Feature | Slowly increases speed to desired set-point to avoid splashing. |
| Spill-Resistant Design | Channels fluids away from internal components. |
| Load Sensor | A built-in load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples. |
| Overload Protection | Audible and visual signals will activate when system detects an obstruction or overload of the tray. |
| Audible Alarm | In timed mode, alarm will sound when time reaches zero. Alarm has optional mute function which can be set from the touch pad controls. |
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
To be Updated
Researchers that trust
LAB.EQUIPMENT
![Trusted by University of North Florida]()
![Trusted by University of Maryland]()
![Trusted by Northwestern University]()
![Trusted by Albert Einstein College of Medicine]()
![Trusted by MUSC Health]()
![Trusted by Florida Southern College]()
![Trusted by University of Colorado]()
![Trusted by WOFFORD]()
![Trusted by Marshall University]()
![Trusted by The University of Arizona]()
![Trusted by Carnegie Mellon University]()
![Trusted by University of Maryland School of Medicine]()
![Trusted by The University of Vermon]()
![Trusted by CF Environmental]()
![Trusted by NM STATE]()
![Trusted by Indiana University]()
![Trusted by University of Missouri]()
![Trusted by University of Nebraska Medical Center]()
![Trusted by Louisiana Tech University]()
Back To Top