Cimarec Mobil Direct Stirrer 150L from Thermo Fisher Scientific
Multiposition | No |
Min Speed (RPM) | 100 |
Max Speed (RPM) | 1000 |
Max Stirring Quantity/Capacity (L) | 150 |
Min Temp Range (°C) | '-10 |
Max Temp Range (°C) | 56 |
Torque Max (Ncm) | 30 |
Viscosity Max (mPas) | 50000 |
Timer | No |
RS-232 | No |
USB | Yes |
Brushless DC motor | No |
CE approved | Yes |
CSA approved | No |
Features:
- Quick Stop function stops the drive within three seconds, minimizing after runs and risk of vessel breakage
- Easy to clean, chemical resistant, sealed stainless-steel housing
- Stir speeds from 100 to 1000rpm
Mobil Direct:
- Stir up to 150L
- Maximum shaft torque is 30Ncm
- Features an integrated controller with adjustable power settings
- Operating conditions are -10° to +40°C at 95%RH
- IP64 protection rated; easily cleaned with running water
Mobil 200:
- Stir up to 200L
- Maximum shaft torque is 50Ncm
- Operating conditions are -10° to +56°C at 100%RH
- IP65 protection rated; easily cleaned with running water
Mobil 600:
- Stir up to 600L
- Maximum shaft torque is 50Ncm
- Operating conditions are -10° to +56°C at 100%RH
- IP65 protection rated; easily cleaned with running water
Requires:
The Mobil 200 and 600 require either the Telemodul 40M or 80M controller (order separately). The Mobil Direct includes a built-in controller; no external controller required.
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Back To Top