|Speed Type||Variable Speed|
|Min Speed (RPM)||30|
|Max Speed (RPM)||500|
|Max Load Capacity (lbs)||77.2|
|Platform Length (in)||20.5|
|Platform Width (in)||29.7|
|Orbit Diameter (mm)||25.4|
|Base Dimension (Depth)||854|
|Base Dimension (Height)||1035|
|Base Dimension (Width)||1128|
|Electrical Max Frequency (Hz)||60|
|Electrical Max Voltage (V)||120|
- Temperature range:- Ambient +5°C to 80 °Cfor ISF-7100 / 7200- Ambient -20°C (Min. +4) to 80°C for ISF-7100R / 7200R
- Competitive high shaking speed up to 500 rpm.- Speed range: 30 to 500 rpm.
- Orbital shaking motion in various diameter.- 25.4mm for ISF-7100/R- 50.8mm for ISF-7200/R
- Microprocessor PID control.
- Three point temperature calibration / Automatic tuning.
- Wide speed range even with heavy workload.- Ideal DD(Direct Drive) brushless motor and triple cam system support heavy load, quiet, maintenance free operation and deliver high torque at high speeds and smooth rotation.
- Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity.- Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.
- Pleasant test environment by the smooth acceleration and deceleration control.- Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
- High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
- Air-tight silicone door seal with lockable door for safe storage of samples.
- Intuitive touch screen LCD controller with easy icons and logical menus.
- Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
- Easy sample monitoring and convenient sample loading.- Clear observation of samples without affecting inner chamber’s environment thanks to the transparent top viewing window with bright LED lamps.- The lid is inclined gently towards the front for easy observation of samples in the chamber.- Gas spring lid supports providing smooth motion, soft opening and closing.
- Repetitive task can be easily performed as the platform stops where it starts.- Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
- Corrosion resistance stainless steel interior.
- Easy-access drain system with a quick disconnect valve offers great convenience to clean up of spills.
- Built-in RS-232 port and USB port for external control and data collection.
- Sturdy foot caster, beneficial for easy mobility during installation or relocation.
- Automatic run after power interruption.
- Temperature and shaking speed deviation alarm.
- Over-current protection.
- Triple independent temperature monitor system.- Temperature deviation alarm (High/Low)- Electronic temperature limiter (High/Low)- Mechanical over-temperature limiter (High)
- Environment-friendly CFC-free refrigerant. (for ISF-7100R / 7200R)
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Controls (Digital/Analog): Digital
Electrical Max Frequency (Hz): 60
Electrical Max Voltage (V): 120
[Shakers] Alarms: Yes
[Shakers] Base Dimension (Depth): 854
[Shakers] Base Dimension (Height): 1035
[Shakers] Base Dimension (Width): 1128
[Shakers] CE Marked: Yes
[Shakers] CETLus Marked: No
[Shakers] CTUVus Marked: No
[Shakers] Display: LCD
[Shakers] Max Load Capacity (lbs): 77.2
[Shakers] Max Speed (RPM): 500
[Shakers] Min Speed (RPM): 30
[Shakers] Orbit Diameter (mm): 25.4
[Shakers] Platform Length (in): 20.5
[Shakers] Platform Width (in): 29.7
[Shakers] RS-232: Yes
[Shakers] Remote Control: No
[Shakers] Speed Type: Variable Speed
[Shakers] USB: Yes