LR500B Digital Laboratory Stirrer from Yamato Scientific America

Controls (Digital/Analog) Digital
Multiposition No
Min Speed (RPM) 100
Max Speed (RPM) 1000
Torque Max (Ncm) 98
Timer No
RS-232 No
USB No
Brushless DC motor Yes
CE approved No
CSA approved No

Digital Laboratory Stirrer

  • DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required
  • Direct-drive system reduces noise and require low maintenance
  • Achieves high torque enabling stirring of high viscosity solution
  • Digital tachometer for easy speed setting and confirmation
  • Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum  load, stopping the motor automatically
  • Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples)

    Features

    • DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required
    • Direct-drive system reduces noise and require low maintenance
    • Achieves high torque enabling stirring of high viscosity solution
    • Digital tachometer for easy speed setting and confirmation
    • Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum  load, stopping the motor automatically
    • Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples)


      MODEL

      LR500B

      Speed Range *¹

      100~1000 rpm

      Max. Torque

      0.98N•m (10kgf•cm)

      Display Of Speed / Torque

      Digital, 3-digit / Green LED, 2 Steps + Overload Display

      Motor (Brushless DC)

      70W

      Speed Control

      Speed feedback control

      Safety Device

      Stops when overloaded

      Stirring Function / Shaft Dia.

      Gearless Direct Drive Type / ø10mm

      Power Source 50/60Hz

      AC100~125V 3.5A

      Included Accessories

      Stirring shaft (ø10*500mm), 75mm 4-blade propeller, clamp

      Operational Accessories*

      Stand and rod

      Optional Accessories

      Propellers (different types and sizes), vacuum adapter, extra long stirring shaft (ø10*800mm), glass stirring shaft

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Brushless DC motor: Yes
CE approved: No
CSA approved: No
Controls (Digital/Analog): Digital
Timer: No
[Lab Stirrer] Max Speed (RPM): 1000
[Lab Stirrer] Min Speed (RPM): 100
[Lab Stirrer] Multiposition: No
[Lab Stirrer] RS-232: No
[Lab Stirrer] Torque Max (Ncm): 98
[Lab Stirrer] USB: No


Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.