MaxQ 7000 Water Bath Orbital Shaker 120V from Thermo Fisher Scientific
Controls (Digital/Analog) | Digital |
Speed Type | Variable Speed |
Refrigerated | No |
Min Speed (RPM) | 15 |
Max Speed (RPM) | 500 |
Max Load Capacity (lbs) | 35 |
Min Temp Range (°C) | 5 |
Max Temp Range (°C) | 60 |
Timer | Yes |
Alarms | Yes |
RS-232 | Yes |
USB | No |
Platform Length (in) | 11 |
Platform Width (in) | 13 |
Display | LED |
CE Marked | Yes |
CETLus Marked | No |
CTUVus Marked | No |
Orbit Diameter (mm) | 12.7 |
Remote Control | No |
Features:
- The MaxQ 7000 is easy to drain and disinfect with the front-access drain system and quick disconnect
- Twin baffles minimize splashing and turbulence in the chamber
- Choice of stainless-steel or Plexiglas™ cover minimizes evaporation and heat loss
- Temperature range of 5°C above ambient to 90°C with use of stainless-steel covers
- Monitor and control chamber temperature range with ±0.2°C accuracy at 37°C in flask
- View speed, time and tesmperature simultaneously on three separate displays
- Triple eccentric drive handles heavy loads, uniform agitation and continuous 24-hr. operation, even at high speeds
- Easy access drain system with quick disconnect is located in the front of the cabinet for convenience in draining and disinfecting the syste
- Low-level water alarm alerts operator
- Optional cooling coil extends the range of applications to near and below ambient
- Holds 11 × 13″ platform which must be ordered separately
Analog Model:
- Variable speed control from 40 to 400rpm controlled by a rotary dial monitored accurately by a traditional tachometer
- Integrated tachometer monitors and displays speed in rpm to guarantee an accurate setting
- Continuous mode or set timer from 1 to 60 min.
Digital Model:
- Speed range: 15 to 500rpm, ±1rpm
- Continuous and timed operation from 0.1 hr. up to 999 hr. or 0.1 min. to 999 min.
- Shaker shutdown and audible/visual alarms signal if unit operates ±10% of set speed, preventing shaker from walking
- Visual/audible signals alert to temperature deviations and low water levels; heat turns off if temperature deviates ±1°C of setpoint
- User-adjustable speed calibration can be performed using a digital handheld tachometer
- Unbalanced load sensor stops platform motion when excess vibration is detected; visual/audible alarms signal until condition is corrected
- Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
- Solid-state DC brushless motor is maintenance-free
- Retains parameters during power failure and restarts automatically after power is restored
Requires:
- Universal Platform (without clamps), or
- Dedicated Platform (with pre-installed clamps)
- Clamps
Recommended for:
- Bacterial suspensions
- Cell culture
- Diagnostic tests
- Extraction procedures
- General mixing
- Hybridization
- Solubility studies
- Staining and destaining
- Washing procedures
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Back To Top