Professional Digital 1000WS Incubating Waving Shaker 120V from Troemner
Controls (Digital/Analog) | Digital |
Speed Type | Variable Speed |
Refrigerated | No |
Min Speed (RPM) | 1 |
Max Speed (RPM) | 30 |
Max Load Capacity (lbs) | 5 |
Min Temp Range (°C) | 5 |
Max Temp Range (°C) | 65 |
Timer | Yes |
Alarms | Yes |
RS-232 | No |
USB | No |
Display | LED |
CE Marked | No |
CETLus Marked | No |
CTUVus Marked | No |
Remote Control | No |
- Electronic tilt adjustment from 0 to 20°* while unit is operating
- LED displays for temperature, speed and tilt angle, and time
- Timer with audible alarm
- 5 year industry leading warranty
The Talboys Professional 1000WS Incubating Waving Shaker combines the unique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit.
Professional Incubating Waving Shaker includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions:
Waving Shaker can be run in conditions from 5 to 40°C (41 to 104°F), maximum 80% relative humidity, non-condensing.
Microprocessor Control | The microprocessor control provides electronic tilt angle adjustment which allows the user to easily adjust waving angle from 0 to 20° while unit is operating. Precise speed control provides smooth, low-speed waving motion down to 1 rpm. |
PID Temperature Controller | Maintains precise temperature control from ambient +5°C to 65°C. Easy-to-use controls allow users to adjust temperature in 1°C increments. |
LED Display | Touch pad controls with easy-to-read, independent LED displays for temperature, speed and tilt angle, and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab beches. Timer will display elapsed time or, when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, even after power has been turned off. |
Speed Ramping Feature | Slowly increases speed to desired set-point to avoid splashing. |
Spill-Resistant Design | Channels fluids away from internal components. |
Overload Protection | Audible and visual signals will activate when system detects an obstruction or overload of the tray. |
Audible Alarm | In timed mode, alarm will sound when time reaches zero. |
Caution Hot Indicator | Symbol illuminates when the temperature of the air in the chamber reaches 40°C and remains lit until the temperature cools down. |
Polycarbonate Lid | Permits viewing of samples without disturbing the internal temperature. |
The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.
Back To Top