Super-Nuova Single-Position Digital Stirring Hotplate Ceramic from Thermo Fisher Scientific

Controls (Digital/Analog) Digital
Multiposition No
Min Speed (RPM) 50
Max Speed (RPM) 1200
Max Stirring Quantity/Capacity (L) 6
Min Temp Range (°C) 1
Max Temp Range (°C) 370
Plate Material Ceramic
Timer Yes
USB No
Brushless DC motor No
CE approved Yes
CSA approved Yes
Electrical Max Frequency (Hz) 60
Electrical Max Voltage (V) 240
Electrical Min Frequency (Hz) 50
Electrical Min Voltage (V) 220

Perform life science and biotechnology applications with the help of Thermo Scientific™ Super-Nuova™ Single-Position Digital Stirring Hotplates. Offered in two sizes, with either ceramic or aluminum tops.

Operating Features

  • Microprocessor control ensures accurate and stable setpoints for temperature (and stirring speed for stirring models only)
  • Electronic feedback controls monitor either top plate surface or liquid temperature (when using external PTFE-coated probe, included) and adjust to setpoint
  • Single control knob controls heat and speed (based on model); lock feature prevents accidental changes
  • Separate digital displays for temperature and rpm
  • Powerful motor and magnetic system prevents magnetic decoupling
  • Temperature adjusts in 1° increments
  • Four user-defined temperature/speed memory keys recall settings
  • Calibration mode allows remote probe to be calibrated to external standards; probe can be programmed as a system (probe, control, display) at any user-selected temperature
  • Can be used in 0 to 27°C, 80% relative humidity, noncondensing environment
  • RS-232 port allows output of time count, temperature setpoint, top surface/remote probe temperature, stirring setpoint and actual speed

Safety Features

  • Red HOT TOP warning light activates when heating surface is above 50°C (122°F); unit flashes HOT OFF until surface temperature falls to 50°C or below, even when heat control is turned off
  • Adjustable overtemperature protection circuit limits top plate temperature
  • Rugged low-profile cast aluminum body provides stability and durability
  • Unit design protects internal components from accidental spills
  • Walk-away timer shuts off heating, stirring or both after preset user-defined interval

Ceramic Top Models

  • Clean easily and resist alkalis and acids
  • Seamless, reflective white surface aids sample visibility
  • Heat to higher temperatures than aluminum tops

Aluminum Top Models

  • Rugged and chip-resistant for superior durability
  • Allow uniform heat distribution across surface

Includes

  • Detachable line cord and plug
  • 6″ Type K probe
  • Stirring models also include stir bar

The product descriptions and attribute groupings and assignments on this page are protected by copyright all rights reserved. If copied you will be persecuted against to the full extent of the law including infringement charges up to $10,000 USD per page of content.

Brushless DC motor: No
CE approved: Yes
CSA approved: Yes
Controls (Digital/Analog): Digital
Electrical Max Frequency (Hz): 60
Electrical Max Voltage (V): 240
Electrical Min Frequency (Hz): 50
Electrical Min Voltage (V): 220
Timer: Yes
[Lab Stirrer] Max Speed (RPM): 1200
[Lab Stirrer] Max Stirring Quantity/Capacity (L): 6
[Lab Stirrer] Max Temp Range (°C): 370
[Lab Stirrer] Min Speed (RPM): 50
[Lab Stirrer] Min Temp Range (°C): 1
[Lab Stirrer] Multiposition: No
[Lab Stirrer] Plate Material: Ceramic
[Lab Stirrer] USB: No

Back To Top
We are fully compliant with the GDPR laws. We promise to safeguard your data and protect your privacy rights.